• The Azimuth (magnetic) is the compass bearing to point your dish.
• The Elevation should be set on the scale on the mount at the back of your dish.
• The LNB Skew is the figure you set on the iLNB scale. 

Ignore the “-“ sign. EG if Dishpointer says the LNB skew is -10° then make sure the scale on your iLNB is set to 10.

 

 

 

If you need to re-point your dish, please check the required Az, El and Skew figures then follow the Point and Play manual, installation videos and instructions on the Self-Installation page.

If you need to adjust the skew, please check the required Skew figure then follow the instructions on the Xpol Tool test page.

back to Signal Check - Overview